0571-87090099
新闻资讯
钢结构的区别有哪些
发布时间:2019-08-24 09:40 阅览量:

判定结构为重钢与轻钢结构确实没有一个统一的标准,很多有经验的设计师或项目经理也常常不能完全说明白,但我们可以以一些数据综合考虑并加以判断:

高层钢结构

1、厂房行车起吊重量:大于等于25吨,可以认为为重钢结构。

2、每平米用钢量:大于等于50KG/㎡,可认为是重钢结构。

3、主要构件钢板厚度:大于等于10MM,轻钢结构用的较少。

另外,还有一些参考值:如每平米造价,最大构件重量,比较大跨度,结构形式,檐高等,以上这些在判断厂房是否为重钢或轻钢时可以提供经验数据,当然很多建筑都是轻、重钢都有。但有一些我们可以较肯定的说是重钢:如:石化厂房设施、电厂厂房、大跨度的体育场馆、展览中心,高层或超高层钢结构。

实际上规范和技术文件都并没有重钢一说,为区别轻型房屋钢结构,也许称一般钢结构为“普钢”更合适。因为普通钢结构的范围很广,可以包含各种钢结构,不管荷载大小,甚至包括轻型钢结构的许多内容,轻型房屋钢结构技术规程只是针对其“轻”的特点而规定了一些更具体的内容,而且范围只局限在单层门式刚架。

轻钢也是一个比较含糊的名词,一般可以有两种理解。一种是现行《钢结构设计规范》(GBJ 17-88)中第十一章“圆钢、小角钢的轻型钢结构”,是指用圆钢和小于L45*4和L56*36*4的角钢制作的轻型钢结构

由此可见,轻钢与重钢之分不在结构本身的轻重,而在所承受的围护材料的轻重,而在结构设计概念上还是一致的 。

There is no unified standard for judging the structure of heavy steel and light steel, and many experienced designers or project managers are often unable to explain it completely. However, we can comprehensively consider and judge based on some data:

High rise steel structure

1. Crane lifting weight of the workshop: more than or equal to 25 tons, which can be considered as heavy steel structure.

2. Steel amount per square meter: more than or equal to 50KG/㎡, which can be considered as heavy steel structure.

3. Thickness of main component steel plate: greater than or equal to 10MM, light steel structure is rarely used.

In addition, there are some reference values, such as cost per square meter, maximum component weight, maximum span, structural form, eaves high, which can provide empirical data when judging whether the workshop is heavy steel or light steel, of course, many buildings are light and heavy steel. But there are some we can be more certain is heavy steel: such as: petrochemical plant facilities, power plant plants, large span of the stadium, exhibition center, high-rise or super high-rise steel structure.

In fact, national standards and technical documents are not heavy steel, to distinguish light housing steel structure, perhaps called general steel structure for "general steel" more appropriate. Because the range of ordinary steel structure is very wide, can include all kinds of steel structure, regardless of the load size, even including many contents of light steel structure, light house steel structure technical specification only according to its "light" characteristics and stipulate some more specific content, and the scope is limited to single layer portal frame.

Light steel is also a vague term, which can be generally understood in two ways. One is the "light steel structure with round steel and small Angle steel" in chapter 11 of current "code for design of steel structure" (GBJ 17-88), which refers to the light steel structure made with round steel and Angle steel less than L45*4 and L56*36*4

It can be seen that light steel and heavy steel points not in the weight of the structure itself, and in the weight of the bearing envelope material, and in the concept of structural design or consistent.